ALJS22 - 22 Ton Heavy Duty Locking Pin Jack Stands (Pair)

ALJS22 - 22 Ton Heavy Duty Locking Pin Jack Stands (Pair)

$0.00

ALJS22

22 TON HEAVY DUTY JACK STANDS (PAIR): Built for serious DIY truck and equipment work, these 48,000 lb. capacity stands deliver reliable support for lifted trucks, trailers, farm equipment, and heavy project vehicles.
ADJUSTABLE HEIGHT RANGE: 11.7" TO 19.4": The 3-position locking pin system offers quick, secure height changes in 2.9" increments, ideal for home mechanics working on lifted pickups, off-road builds, or large equipment.
V-SHAPED AXLE + FRAME SUPPORT SADDLE: Reinforced V-channel saddle provides stable contact on axles, frame rails, and suspension components, helping DIYers safely handle brake jobs, axle swaps, and under-vehicle repairs.
WIDE 10"X10" STABILITY BASE: Oversized square base increases floor grip and stability, reducing wobble and improving safety when supporting heavy trucks or equipment in garages, driveways, or workshops.
TETHERED LOCKING PIN (ANTI-LOSS DESIGN): The wire-tethered pin stays attached to the stand, preventing lost hardware and keeping your garage organized during long repair sessions or multi-day projects.
EASY CARRY ERGONOMIC HANDLE: Large, heavy-duty handle makes positioning each stand simple, even for solo DIYers working around big vehicles or tight garage spaces.
MATCHED PAIR FOR BALANCED SUPPORT: Sold as a two-stand set to ensure even load distribution, giving home mechanics a stable and predictable setup for heavy trucks, trailers, and equipment.
DURABLE POWDER-COATED FINISH: Corrosion-resistant coating protects against rust, moisture, and shop wear, keeping your jack stands performing and looking great for years of DIY use.
ASME PASE CERTIFIED + ARCAN 1 YEAR WARRANTY: Fully compliant with ASME PASE safety standards and backed by the Arcan Professional Tools warranty, giving DIY users trusted professional-grade reliability.

Add To Cart

Capacity	22 ton
Maximum Height	19.41 in
Minimum Height	10.7 in
Warranty	1 Year
Dimensions	10.6 x 17.7 x 13.4 in
Weight	75.92 lbs

A20012

CAPACITY: Supports 3.5 Ton (7,000 lb.) for professional lifting and service work.
LOW PROFILE ACCESS: Covers 3.75 in. to 21.75 in. lift range for service access and vehicle positioning.
QUICK LIFT: Double pump pistons raise the saddle to the load quickly.
HYDRAULIC PROTECTION: Bypass and overload valves help prevent over-extension and use beyond rated capacity.
CONSTRUCTION: Steel construction is suited for repeated professional shop and garage use.
SAFETY CERTIFIED: Complies with ASME PASE-2019 safety standards for lifting equipment.
1 YEAR WARRANTY: Backed by the ARCAN 1-year warranty.

A20002 - 3 Ton Steel Floor Jack

$0.00

A20002

Low profile frame for easy access under low ground clearance areas.
Overload safety valves prevent the jack from being used beyond its rated capacity.
Bypass safety valves to prevent the ram over extension.
High carbon steel side plates provide increased chassis strength.
Easy maneuverability with wide front wheels and ball bearing mounted rear casters.
Wiper seals to protect the hydraulic system from contaminants.

A20005 - 3 Ton Steel Floor Jack

$0.00

A20005

CAPACITY: Supports 3 Ton (6,000 lb.) for cars, SUVs, and light trucks.
QUICK LIFT: Double pump pistons raise the saddle to the load quickly to save time in the shop or garage.
PRECISION CONTROL: Universal joint release mechanism allows smooth and accurate lowering.
HEAVY-DUTY CONSTRUCTION: High carbon steel construction and reinforced side plates provide strength and torsional stability.
VEHICLE PROTECTION: Rubber saddle pad and foam handle bumper help protect vehicle contact surfaces during positioning and lifting.
HYDRAULIC SAFETY: Bypass and overload valves help prevent over-extension beyond rated capacity.
SAFETY CERTIFIED: Complies with ASME PASE-2019 safety standards for professional lifting equipment.
1 YEAR WARRANTY: Backed by the ARCAN 1-year warranty.

A20003 - 3 Ton Steel Low Profile Floor Jack

$0.00

A20003

CAPACITY: Supports 3 Ton (6,000 lb.) for automotive repair, tire service, maintenance, and general vehicle lifting.
LOW PROFILE ACCESS: Low-profile frame supports easier positioning under low-ground-clearance vehicles.
REINFORCED CHASSIS: High carbon steel side plates add structural strength for demanding service conditions.
HYDRAULIC PROTECTION: Bypass and overload safety valves help prevent over-extension and use beyond rated capacity.
SMOOTH MOBILITY: Wide front wheels and ball-bearing rear casters improve stability and maneuverability under vehicles.
CONTROLLED OPERATION: Long handle design provides leverage for controlled lifting and lowering.
HYDRAULIC DURABILITY: Wiper seals help protect internal hydraulic components from dirt and contaminants.
1 YEAR WARRANTY: Backed by the ARCAN 1-year warranty.

A20001 - 3 Ton Hybrid Floor Jack

$0.00

A20001

Features a hybrid of steel and aluminum construction to provide the durability of steel in a lightweight chassis.
Dual pump pistons for quick lifting to the load.
Rubber saddle pad and handle bumper to protect the vehicle.
Side handle for easier carrying and positioning of jack.
Aluminum and steel construction provides a total weight of only 58 lbs.
Ideal for the professional mechanic and enthusiast.

A20018 - 3 Ton Aluminum Floor Jack

$0.00

A20018

Lightweight aircraft-grade aluminum allows for easy maneuverability.
Dual pump pistons quickly raises the floor jack saddle to load.
Reinforced lift arm increases strength, chassis torsion control, and durability.
Designed with a rubber saddle and a foam handle bumper for added vehicle protection.
Side mount handle for easier carrying and positioning of jack.
2 piece handle allows for easy storage.
Bypass and overload valves prevent over-extension of hydraulic ram and jack use beyond rated capacity.

A20004 - 3 Ton Hybrid Aluminum and Steel Low Profile Floor Jack

$0.00

A20004

CAPACITY: Supports 3 Ton (6,000 lb.) for professional and home garage use.
DUAL PUMP PISTONS: Quickly raises the saddle to the load for efficient lifting.
LOW PROFILE ACCESS: Low profile design reaches under lower vehicles with a minimum height of 4 in. and raises to 18.5 in. for broader service coverage.
HYBRID CONSTRUCTION: Aluminum and steel frame provides strength with a lightweight design.
REINFORCED LIFT ARM: Added strength improves chassis control and long-term durability.
VEHICLE PROTECTION: Rubber saddle and foam handle bumper help protect contact surfaces.
SIDE CARRY HANDLE: Allows convenient positioning and movement around the workspace.
1 YEAR WARRANTY: Backed by the ARCAN 1 year warranty.

A20016 - 2 Ton Steel Low Profile Floor Jack

$0.00

A20016

Provides the lowest low height (2.75 in.) and the highest high height (24 in.) compared to the average jack.
Low profile frame allows for easy access under low ground clearance vehicles.
Dual pump pistons quickly raises the floor jack saddle to load.
Steel construction allows for heavy duty use.
Universal joint release mechanism provides precise control of jack.
Features a 32 in. extra long chassis.
Bypass and overload valves prevent over-extension of hydraulic ram and jack use beyond rated capacity.