10 Ton Tall Height Pin Type Jack Stands (Pair)

10 Ton Tall Height Pin Type Jack Stands (Pair)

$0.00

ALJS10T

10 TON HEAVY DUTY JACK STANDS (PAIR): With a combined 20,000 lb. capacity, these high-height pin-type stands give DIY truck owners and equipment enthusiasts the strength needed to safely support large vehicles, trailers, and heavy machinery during repairs or upgrades.
EXTRA TALL 28"–46" HEIGHT RANGE: Designed for lifted trucks, buses, RVs, and oversized equipment, the impressive 28" to 46" service height provides comfortable under-vehicle clearance for suspension work, fabrication, and long-term storage.
9 LEVEL HEIGHT ADJUSTMENT SYSTEM: The nine locking pin positions, spaced at 2" intervals, allow precise height control across a wide range of vehicle types, helping DIYers quickly dial in the perfect setup for safe, stable support.
16.9" SQUARE FOUR LEG STEEL BASE: The oversized 16.9" square footprint and four-leg design deliver exceptional stability under heavy loads, keeping the stands firmly planted on garage floors, shop surfaces, or outdoor work areas.
REINFORCED HIGH STRENGTH SUPPORT TUBE: Built for demanding projects, the heavy-duty reinforced support tube resists flex and maintains strength under sustained weight, ideal for extended repairs or multi-day equipment maintenance.
TETHERED LOCKING PIN (ANTI-LOSS DESIGN): The wire-tethered pin stays attached to the stand at all times, preventing misplaced hardware and keeping your workspace organized during busy DIY projects.
OVERSIZED SADDLE WITH LOCATING LUGS: The large 3.1" x 5.1" saddle features integrated locating lugs that help position axles and frame contact points accurately, reducing slip risk and improving stability under heavy loads.
MATCHED PAIR FOR EVEN LOAD DISTRIBUTION: Sold as a two-stand set, ensuring balanced, symmetrical support for large vehicles and equipment — a must for safe DIY lifting and long-term storage.
ARCAN PROFESSIONAL TOOLS WARRANTY + ASME PASE CERTIFIED: Fully compliant with ASME PASE safety standards and backed by the Arcan 1-year warranty, giving DIY users professional-grade confidence and reliability.

Add To Cart

BUY ON AMAZON

Capacity	10 ton
Maximum Height	46.5 in
Minimum Height	28.1 in
Warranty	1 Year
Dimensions	16.9 x 16.9 in
Weight	111.95 lbs

ALFJ60

3 ton load capacity with a lifting range of 4.9" to 52.3".
Ideal for pulling, clamping, spreading, and lifting a tractor or 4-wheel drive vehicle.
Heavy duty steel construction for strength and durability.
Lifting arm can be adjusted to any position on the upright.
Ratcheting design for controlled lift.
Powder coated for rust resistance.

3 Ton Steel Floor Jack

$0.00

A20002

Low profile frame for easy access under low ground clearance areas.
Overload safety valves prevent the jack from being used beyond its rated capacity.
Bypass safety valves to prevent the ram over extension.
High carbon steel side plates provide increased chassis strength.
Easy maneuverability with wide front wheels and ball bearing mounted rear casters.
Wiper seals to protect the hydraulic system from contaminants.

6 Ton Steel Jack Stands

$0.00

ALJS6

The counter-weighted pawl locks in place securely to prevent slipping, while allowing easy adjustments.
A large contoured saddle with locating lugs helps support and position vehicle frame.
The wide base stance of 10. 5" by 11. 5" delivers superior stability.
The welded construction and alloyed steel offer years of support.
Base pads prevent the jack from sinking into asphalt and provide stable footing for the jack stands.
Working Range: 15. 5" to 24".

1500lbs Underhoist Support Stand

$0.00

ALSS15

Designed to support vehicle components only and ideal for exhaust system installations and shock absorber replacement.
Threaded spin handle provides a self-locking feature to prevent the stand from lowering without assist.
12" Diameter base for better overall stability.
Bearing mounted spin handle provides smooth and easy turning when adjusting the height under the load.
Slender design provides lightweight and easy handling in close quarters.
Contoured saddle for support under most component configurations.

48" Farm Jack

$0.00

ALFJ48

3 Ton load capacity with a lifting range of 4.9" to 40.1".
Ideal for pulling, clamping, spreading, and lifting a tractor or 4-wheel drive vehicle.
Heavy duty steel construction for strength and durability.
Lifting arm can be adjusted to any position on the upright.
Ratcheting design for controlled lift.
Powder coated for rust resistance.

3 Ton Hybrid Floor Jack

$0.00

A20001

Features a hybrid of steel and aluminum construction to provide the durability of steel in a lightweight chassis.
Dual pump pistons for quick lifting to the load.
Rubber saddle pad and handle bumper to protect the vehicle.
Side handle for easier carrying and positioning of jack.
Aluminum and steel construction provides a total weight of only 58 lbs.
Ideal for the professional mechanic and enthusiast.

3 Ton Steel Jack Stands

$0.00

ALJS3

The counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments.
A large contoured saddle with locating lugs helps support and position vehicle frame.
The wide base stance of 7-1/4" by 8-1/16" delivers superior stability.
The welded construction and alloyed steel offer years of support.
Base pads prevent the jack from sinking into asphalt and provide stable footing for the jack stands.
Working Range: 11-5/8" to 17. 5"

2 Ton Steel Floor Jack

$0.00

A20015

Low profile frame for easy access under low ground clearance areas.
Dual pump pistons quickly raises the floor jack saddle to load.
Universal joint release mechanism provides precise control of jack.
Steel construction allows for heavy duty use.
Designed with a rubber saddle and a foam handle bumper for added vehicle protection.
2 piece handle allows for easy storage.
Bypass and overload valves prevent over-extension of hydraulic ram and jack use beyond rated capacity.